If you've ever looked at the inside of your jeans and wondered how those clean, durable seams are made—chances are you're looking at a flat-felled seam. This seam is strong, long-lasting, and has a clean finish on both sides, making it ideal for garments and items that get a lot of wear, like denim, shirts, and activewear.
In this blog post, we’ll walk through everything you need to know about flat-felled seams—from what they are and when to use them, to a step-by-step guide on how to sew one like a pro.
Get The Suplie List By Clicking Here
📌 What is a Flat-Felled Seam?
A flat-felled seam is a type of seam finish that encloses the raw edges of the fabric within the seam itself, creating a flat, neat, and extremely durable finish on both the inside and outside of a garment. It’s a go-to seam for:
Jeans and denim workwear
Dress shirts (especially men's shirts)
Pajamas and boxers
Reversible garments
Outdoor gear
---
🧵 Pros and Cons of Flat-Felled Seams
✅ Pros:
Super strong and wear-resistant
Clean, professional look inside and out
No need for a serger or pinking shears
Great for heavy-duty garments
⚠️ Cons:
Slightly bulkier than other seams
Can be tricky on curves or lightweight fabrics
Takes more time and precision than basic seams
---
✂️ Tools & Materials You'll Need
Fabric (woven fabrics like cotton, denim, or linen work best)
Sewing machine with straight stitch
Thread to match or contrast
Pins or clips
Iron and ironing board
Fabric scissors or rotary cutter
Ruler or seam gauge
Optional: Topstitching thread for contrast
---
📐 Flat-Felled Seam: Step-by-Step Instructions
Here’s how to create a flat-felled seam with a ⅝" (1.5 cm) seam allowance, which is standard for most commercial patterns. Adjust as needed for different seam allowances.
Step 1: Place Fabric Right Sides Together
Align the two pieces of fabric right sides together and pin them in place.
Step 2: Stitch the Seam
Sew a straight stitch ⅝" (1.5 cm) from the edge of the fabric. Backstitch at the beginning and end.
Step 3: Trim One Seam Allowance
Open the seam and press both allowances to one side. Now trim one side down to ¼" (6 mm)—this will be the seam allowance that gets enclosed.
Step 4: Fold and Press
Take the longer (untrimmed) seam allowance and fold its raw edge over the trimmed one. Then fold the entire flap down flat against the fabric. You’ve now enclosed the raw edges inside this fold. Press well.
> Tip: Use a point turner or edge creaser to help get a crisp fold.
Step 5: Topstitch the Seam
Topstitch close to the folded edge (about 1⁄8" or 3 mm from the edge), securing all layers. This stitch will show on the outside, so make it neat!
> Optional: Use a twin needle or topstitching thread for a decorative look.
Get The Suplie List By Clicking Here
---
🧭 Alternative Method: Sewing Flat-Felled Seams from the Outside
Some patterns or garments may call for sewing the seam from the outside so the topstitching is on the right side (common in jeans).
How it works:
1. Place fabric wrong sides together and sew the seam.
2. Trim one side, fold the longer one over and under, enclosing the raw edge.
3. Topstitch from the right side.
This technique is functionally the same, but places the topstitching on the outside of the garment, which can be more aesthetically desirable.
---
👚 Tips for Success
Use an edge stitch foot if your machine has one to help guide topstitching.
Press, press, press—flat-felled seams only look good when everything is well pressed at each step.
For curved seams, clip and notch the allowance slightly before folding to reduce puckering.
Use lighter fabrics for learning—heavier ones like denim can be bulky for beginners.
For bulk management, hammer thick seams gently (yes, really!) or use a seam jumper when stitching over thick parts.
---
🧵 Common Flat-Felled Seam Applications
Garment Type Placement of Seam
Jeans Inseam and outseam
Men's Shirts Side seams, sleeve seams
Pajamas Side seams, inner leg seams
Outdoor Jackets Shoulder seams, side seams
Bags/Backpacks Base seams, structural joins
---
🧼 How to Care for Flat-Felled Seams
Because the raw edges are enclosed, flat-felled seams are less prone to fraying and can withstand repeated wash and wear. No special care is needed—just enjoy the durability!
---
🧵 Final Thoughts
Flat-felled seams are an essential part of any sewist's skillset. If you’re looking to improve the durability of your garments or add a professional touch to your projects, mastering this seam will level up your sewing game.
Start with straight seams on medium-weight cotton and work your way up to curves and heavier fabrics like denim. With some practice, you’ll be sewing these clean, strong seams like a pro.
Have questions or want to share your flat-felled projects? Leave a comment below or tag me on social media with your makes!
0 comments